Table Of Content

Of course the maximum spec for EATX motherboards is only 330mm, and the empty holes that fit the extra standoffs required to support such wide motherboards are clearly visible just a few inches behind the front fans. A cutaway in the power-supply shroud beneath the motherboard tray provides space behind the fan mounts to install radiators up to 58mm thick. Developed for an enjoyable building and gaming experience, North offers an intuitive interior layout and generous compatibility. It supports GPUs up to a length of 355 mm, or up to 300 mm with a 360 mm front radiator. For a smooth start, it includes two 140 mm Aspect PWM fans, a USB-C port and drive mounts for up to four 2.5” drives and two 3.5” drives out of the box.
Features of the Fractal Design North
My previous case was a Phanteks P400s TG, so the review is coming from that angle.

Accessories / Other
Still, the cost of raw materials these days is up, up, and up, and you’ll be hard pressed to find a finer-looking combo of steel, glass, and wood outside an architect’s studio. You might assume the mesh improves thermals, but there's also evidence (at least in some cases) that air coming in from the side can be detrimental to the front-to-back airflow path. The only other case we've tested recently with a mesh side panel was the Azza Aero 480, and that did not perform very well. Fractal's North, though, performed exceptionally well in our testing – especially with CPU thermals. The top of the North features a removable panel with a leather tab and the back for easier removal.
Fractal Design North chassis review (Page 13) - guru3d.com
Fractal Design North chassis review (Page .
Posted: Wed, 07 Dec 2022 08:00:00 GMT [source]
Honest, Objective, Lab-Tested Reviews
Fractal Design's cases generally aren't all that quiet, and that's true here as well. During our full-speed test, we got an average of 53 decibels, which is, bluntly, quite loud. So it's likely the tempered glass version of the North is at least a little quieter.
North reimagines the gaming PC, introducing natural materials and bespoke details to make gaming a stylish addition to your living space. Leveraging design to give you a better experience, its airflow functionality and intuitive layout make building and gaming both smooth and enjoyable. What would the popular Fractal Design North look like, expanded to Extended ATX (EATX) scale? Real walnut trim was the biggest thing that made Fractal Design’s original North a big hit among ATX system builders, and the firm is ready to take another chunk out of the market (and some forest) with a $179.99 North XL version. Key improvements include the ability to fit a triple-140mm (420mm format) radiator up front or a graphics card up to 413mm deep, and all that extra capability costs only an extra inch or two of additional space on your desk.
CPU Cooler
Fractal Terra Mini-ITX Case Review: Build Quality, Thermals, Acoustics, & Cable Management GamersNexus - GamersNexus
Fractal Terra Mini-ITX Case Review: Build Quality, Thermals, Acoustics, & Cable Management GamersNexus.
Posted: Thu, 09 Nov 2023 08:00:00 GMT [source]
Sign up for Lab Report to get the latest reviews and top product advice delivered right to your inbox. Here’s a quick recap of the parts in our standard test build for ATX and larger chassis. It fits together as shown, by removing the North XL’s original eight slot covers. We found, though, that the heads of the included card screws were too large to fit through the openings above them. Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you.
Completed Builds Using Fractal Design North ATX Mid Tower Case
PCMag supports Group Black and its mission to increase greater diversity in media voices and media ownerships. We guarantee your satisfaction on every product we sell with a full refund in accordance with our return policy – no receipt needed if you have a Micro Center Insider Account. Fractal's North is a mid-tower ATX case that disguises itself as a pretty piece of furniture. Now, I never took woodshop in high school, but this feels and looks like bamboo. I recently bought a Fractal North (Charcoal / Black Mesh version) and I just wanted to share some impressions before I forget.
The small connector seen on the right uses a 4-pin PWM connector for motherboard control and connects up to four PWM fans (including the three front fans that come with the case). The Core i K is set at a fixed 4.7GHz clock at 1.3v on all performance cores to ensure consistent power consumption across test scenarios. Letting the GPU run at 75% fan speed enables it to maintain its power target while sticking to one set reasonable fan speed, so that the temperature is the only variable. PCMag.com is a leading authority on technology, delivering lab-based, independent reviews of the latest products and services. Our expert industry analysis and practical solutions help you make better buying decisions and get more from technology.
The Fractal Design North XL is a little noisy at full speed, partly because it has large fans, and partly because its front panel is designed for optimal airflow rather than as a noise barrier. Fortunately for Fractal Design, most of its competitors are also a little noisy. Regardless of how we got there, the installed card now sits vertically above the power supply tunnel and looks pretty spiffy, if you ask us.
Case companies often take an existing design and mostly (or sometimes only) change the front panel. This isn’t the case (no pun intended) with the North, which is available in either white or black and with a mesh or tempered glass side panel. Enter Fractal Design, a case manufacturer that often finds itself on our Best PC Cases, and its latest (and hopefully trend-setting) North case. The North is an ATX mid-tower chassis that features wood slats on the front panel (backed by mesh) and the option for a mesh or tempered-glass side panel. Fractal Design’s new case retails for $130 and comes in Charcoal Black or Chalk White.
The side panels are removed via two thumb screws, which is a bit disappointing for a case of this price, and it’s almost ironic when you consider the otherwise excellent aesthetics of this chassis. If you’re smitten with the wood face of the original North, the North XL will be likely your go-to pick if your timber-lust goes along with a need for oversize components. It didn’t dominate our benchmarks, but it’s no slouch, and the build process was about as easy and quick as any of recent note.
No comments:
Post a Comment